UPGRADE TOOL FOR YOUR XCUBE MINI
XCUBE MINI V1.059
Solved the “Short” problem during the vaping.
NOTICE
1. Please make sure turning off the device and take out the battery before upgrading
2. Please make sure to hold the firing button all the time during the upgrading
PREPARE
1. Factory Micro USB cable (with data transfer function).
3. OS System requirement: Windows XP/7/8/10. (FYI: There is no driver to match Apple Mac OS from the PCB chip vendor.)
DOWNLOAD LINK
xcube mini upgrade tool (v1.059) (zip)
Guideline
1. Open the XCube mini upgrading Tool folder with the programming tool and BIN file, and then open the ISP tool in the arrow.
2. Hold the firing button, connect the XCube mini to the computer(you have to hold the firing button during the upgrading)
3. Click the “Connect” icon till the “disconnect ” icon comes with light.
4. Click APROM icon.
5. Find the BIN file in the arrow of the folder and open it.
6. Please mind that the Config data should be 00013000. Redownload the ISP tool if you can’t adjust it.
7. Mark “APROM” file icon and "Config" icon, then click "Start" .
8. Please mention that you will get a PASS if you have successfully upgraded your XCube Mini.